23.12.12

GerberMerger PCB Panelizing Program

Gerbers are text files that contain the information needed to create a PCB. I knocked up a rough and ready script to merge Gerber files to help panelize my layouts before sending them off to FusionPCB.




Magic Mouth v0.1

Build a Magic Mouth shield from scratch using the materials in the Github repository. Hear it in action speaking in response to commands typed into the Arduino serial monitor.




11.12.12

Home Made Arduinos

Making Arduinos was pretty laborious. The toner transfer went well, but drilling was a dental experience.


Severinos: DIY Arduinos


7.12.12

DIY PCBs By Stovetop Toner Transfer

If the clothes iron method fails for you, try this new twist on the toner transfer process. Put a heavy hotplate on the stove and dial in a temperature of 175 °C using a thermocouple. Bond the toner image to the copper clad board by placing them print side down onto the hotplate between two sheets of paper and applying pressure with a rolling pin for 2-5 minutes. For double sided boards, flip every 30 seconds or so.


Stovetop toner transfer using 175 Celsius hotplate and rolling pin

1.12.12

December Swag Bag: FEZmini

The FEZ mini runs .NET, can act as a USB host with minimal adaptation, and balances on the end of a finger. Tip of the small, brimless hat to Seeed Studio.

FEZmini balanced on fingertip